ProLiant Servers (ML,DL,SL)
1748254 Members
3958 Online
108760 Solutions
New Discussion

Re: HP Proliant ML350 G3

 
John Lutz
New Member

HP Proliant ML350 G3

I just received a server for use as a test server and am having trouble getting by setting up Win2K. Since there is no Win2K authentication sticker on the box, I assume it did not come with Win2K pre-installed. This server was cascaded out of another location and has a current installation of Win2K on it, but I have no permissions here.

I was provided with a Win2K install CD, but when I try to boot to the CD I get a response saying that 'setup found no hard disk drives on your computer'. Earlier in the boot sequence I also get 'no SCSI boot device found', in case that provides a clue.

Any ideas on how I should proceed?
2 REPLIES 2
David Paris_1
Frequent Advisor

Re: HP Proliant ML350 G3

You have to create the logical devices first.

1-Insert the smart start cd
2-Choose ACU -> This will help you create the array
3- Go to the menu deployment server and then choose the OS that you wont to install next supplie the serial number that you have for Win2K.

I think that is the information that you need.

Kind Regards
David Paris_1
Frequent Advisor

Re: HP Proliant ML350 G3

If you don´t have smart star you can downloaded here:
http://h18004.www1.hp.com/support/files/server/us/subscription/PSM_subscription.html

bye