HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Proliant ML350 G4 cannot auto start up after power resume

 
Liu Shaw Chan
Occasional Advisor

HP Proliant ML350 G4 cannot auto start up after power resume

I have server above that one of Redundant PSU connected to UPS & other one to normal power.

During power failure, the APC UPS software will call the server to shutdown.After power resume,the server cannot auto start up.Any solution?
1 REPLY
KarloChacon
Honored Contributor

Re: HP Proliant ML350 G4 cannot auto start up after power resume

hi

there is an option on RSBU (BIOS).
- Server Availability
- Automatic Power On
- Enable

"Automatic Power-On
The Automatic Power-On feature enables the server to automatically power on when auxiliary power is applied to the server."


also if you have ilo you can enable it on power management

regards
Didn't your momma teach you to say thanks!