HP Proliant ML350 G5 disk SATA replacement

[unipista]

Hi, all

I am a novice with these systems.

Today I've received signal failure  of  a disk SATA 3.5" 500GB (PN 395501-002), that worked in RAID 1 with a second disk with same PN.

Now, I believe this PN  is no more available!

My question are:

1) May I use a disk a disk SATA 3.5" 500GB with PN 458928-B21 (in RAID1 with disk PN 395501-002)? 

2) There are suggested HP diagnostic software to verify the damaged disk?

Thank you all, for your help.

Regards.

[PGTRI]

hi,

It should be not a problem to use the disk with the other P/N. You can use HP Array Configuration Utility to monitor and diagnostic the drives/controller.

Thanks

regards,

[Priyansha]

Hi,

You can go for it.

For any other information on ML350 G5 goto the following link of guided troubleshooting : 

http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121586&lang=en&cc=us