ProLiant Servers (ML,DL,SL)

HP SAS Disk is not detecting in ProLiant ML350 Gen9 RAID B140i Controller

 
karant
Advisor

HP SAS Disk is not detecting in ProLiant ML350 Gen9 RAID B140i Controller

I purchased two disks and installed them in the HP 350 G9 Server, it's not detecting. 

HP Disk- 638521-002 HP G8 G9 3-TB 6G 7.2K 3.5 SAS

I used WD 4TB disk with Gen 9 caddy, inserted it to make sure the interfaces are working, confirmed - they are working and listed the WD HDD in the iLO. So I confirmed interfaces are working!

I swapped the caddy, and fixed the HP disk again; it's still not detecting. 

I hope, even if the disk is faulty, it should list in the iLO and controller - it should show as degraded or faulty. 

Raid Controller B140i is not detecting at all. I updated the firmware of iLO to the latest version, the problem continues and does not list the disk.

Can you guys suggest fixing the issue? 

5 REPLIES 5
sudhirsingh
HPE Pro

Re: HP SAS Disk is not detecting in ProLiant ML350 Gen9 RAID B140i Controller

@karant 

B140i support only SATA drives.

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04406959

NOTE:  No SAS supported

 

Hope this helps!

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo

karant
Advisor

Re: HP SAS Disk is not detecting in ProLiant ML350 Gen9 RAID B140i Controller

If I purchase and install the PCIe, HP Raid Controller adapter and move the SAS cable from the motherboard to this card, will it support SAS disk?

HP LSI SAS 6GB Raid Controller Card SAS9217-4i4e 725504-002

Thanks, 

 

karant
Advisor

Re: HP SAS Disk is not detecting in ProLiant ML350 Gen9 RAID B140i Controller

Looks like this adapter can support. 

HP 726759-001 Smart Array H240ar 12gb/s Dual Port Pci-e 3.0 X8 Sas Smart Host Bus Adapter.

Correct?

SanjeevGoyal
HPE Pro

Re: HP SAS Disk is not detecting in ProLiant ML350 Gen9 RAID B140i Controller

Hello,

I would suggest you use only supported hard disk, follow the below link for more clarifications.


HPE ProLiant ML350 Gen9 Server - Option Parts
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04443275#N107DB

HPE Dynamic Smart Array B140i Controller - Overview
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04406959

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.
Regards,
 

 


I am a HPE Employee

Accept or Kudo

sudhirsingh
HPE Pro

Re: HP SAS Disk is not detecting in ProLiant ML350 Gen9 RAID B140i Controller

@karant 

Yes, H240ar support SAS drives.

You can use it or choose any other supported Smart Array Controllers for Ml350 Gen9 which support both (SAS and SATA Drives)

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo