ProLiant Servers (ML,DL,SL)
1748117 Members
3653 Online
108758 Solutions
New Discussion юеВ

Re: HP SUM iLO Nodes up to date.

 
MattW456
Occasional Collector

HP SUM iLO Nodes up to date.

Hi,

I'm managing a large estate with multipule HP servers. We have iLO 4 set up on them. As part of this i'm trying to keep the firmware up to date with HP Smart Update Manager 7.5.1.

The problem im having is that I have imported the latest iLO 4 update file (2.44) into it as a baseline, and applied it to a node group of iLO 4, and run an inventory on it. However the node group is reporting that all nodes are up to date, despite it listing the installed and active versions of the iLO 4 firmware as 2.40?

Is there anything that you can suggest for me to try?

Thanks
Matt

 

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: HP SUM iLO Nodes up to date.

Something wrong with our baseline? Version 2.40 is part of the original SPP 2016.04 - so the new version is probably somehow not included?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
MattW456
Occasional Collector

Re: HP SUM iLO Nodes up to date.

No, I have manually downloaded the RPM file for 2.44 and added it as a baseline in HP SUM. I have then applied it to the node group but it is saying up to date even through the nodes are 2.40?