HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Server ML115 G5 not start and the fans stay on full.

 
Lewistrauss
Occasional Visitor

HP Server ML115 G5 not start and the fans stay on full.

The server will not start. When the power button is pressed, the fans stay on full and no output is displayed via theVGA port. The system does not beep on startup.

Tried removing the hard drive, using new memory, clearing cmos and reseating all of the connectors, but it will not boot. Even tried a different power supply and the same issue occured. 

The power LED on the front of the server is green, along with the LED near the CPU. 

The motherboard LED (hearbeat) is blinking green. 

Could the issue be something simple?

Any solutions to the problem?

Thanks for the suggestions.

Thanks

1 REPLY
Lewistrauss
Occasional Visitor

Re: HP Server ML115 G5 not start and the fans stay on full.

thank