ProLiant Servers (ML,DL,SL)
1748092 Members
5702 Online
108758 Solutions
New Discussion

HP Smart Array P410i "Saving Configuration..." Taking Forever

 
jonathan3
New Member

HP Smart Array P410i "Saving Configuration..." Taking Forever

Howdy, 

Decided to purchase an HP DL380 G7 off of eBay some time ago. It worked all right. I decided to swap out all of the drives for larger capacity ones, but when creating a logical drive in RAID 10, it gets stuck on "Saving configuration." 

The drives are 600GB each, with a total of 8, so I don't think it should take days to complete. 

 

Thanks,

Jonathan

1 REPLY 1
sudhirsingh
HPE Pro

Re: HP Smart Array P410i "Saving Configuration..." Taking Forever

Hi,

Looks unusual,

Please try following,

Do Power cycle and retry,

Update Controller firmware then check,

Boot with SmartStart CD then try to configure.

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_2e6c41afdb8c4c0d9bffce484c&swEnvOid=4064#tab-history

Hope this helps!

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo