HPE Community
ProLiant Servers (ML,DL,SL)
1753449 Members
6211 Online
108794 Solutions
New Discussion

Re: HP Smart Array P411/1GB FBWC - Controller Lockup Error (code 3h)

 
Torsten.
Acclaimed Contributor

‎01-19-2015 06:33 AM

‎01-19-2015 06:33 AM

Re: HP Smart Array P411/1GB FBWC - Controller Lockup Error (code 3h)

Would you plase double check the firmware revisions installed?

 

P411 - version 6.60

D2700 - version 0149

 

http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=4017900&swLangOid=8&swEnvOid=4064

 

 

It's IMHO worth to check the disk firmware too.

 

Has the smart array controller a cache module installed?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Ragie
Advisor

‎01-19-2015 07:48 AM - edited ‎01-19-2015 07:48 AM

‎01-19-2015 07:48 AM - edited ‎01-19-2015 07:48 AM

Re: HP Smart Array P411/1GB FBWC - Controller Lockup Error (code 3h)

Firmware version is the same as you have posted above.

 

Yes, there is a 1GB cache installed on the controller.

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.