HP Smart Storage RAID Configuration

[RudiScott16]

Good day,

I have a DL380 Gen10 with 4 SATA drives which I was able to create a RAID 5 Array. These drives are connected to an Smart Storage P816i-a SR Controller.

I also have 2 SSD drives connected to the Intel Adapter.

THe problem is that in the Storage Administrator I can see those 2 drives, they are listed as Other Devices. I am unable to create any Array on these 2 SSD drives.

Can someone please assist me with setting up the 2 SSD drives in a RAID 1 volume.

Thanks

[sudhirsingh]

@RudiScott16 

Enable SW Raid in the BIOS(S100i) then configure raid 1 with them however that will only work if that is SATA SSD.

Refer below for enabling SW RAID 

https://techlibrary.hpe.com/docs/synergy/shared/ts/GUID-24FE96A7-9289-408C-AF95-288FE0F0EE2A.html

Regards,

Sudhir