HP USB KEY UTILITY cannot process SPP-2019-03

[ArunKanth]

hpe usb key utility not working i tried

1)Hpe usb key ulitity latest version

2)Rufus

3)Iso to Usb

tried But No Luck

[Torsten.]

On Windows?
Consider to run the tool "as Administrator"

[ArunKanth]

Tried but not working

[Torsten.]

Consider also to compare the checksum of the ISO file.

[ArunKanth]

Compare the checksum file also

run as admin aslo

still not working

[R_Raj]

Hello ,

Please follow the steps below 

1. Download the required version of SPP .

2. Make sure USB drive used is greater than 4GB and less than  32GB .

3. Mount the SPP ISO to a PC and navigate to SPP2019030/usb/usbkey and execute the usbkey.exe as Administrator Privileges .Make sure the Usb drive is plugged in and follow the usb wizard .

In case if there is any further issue . Please share a detailed description about the error .

Regards

[riahc3]

That doesnt work either. It freezes in a not responding state. 

[Jimmy Vance]

---

@riahc3 wrote:

That doesnt work either. It freezes in a not responding state. 

---

The USB key utility in SPP2019030 works as expected.  I just used it to build the SPP on a generic 16GB stick.  

[riahc3]

It is not working. The process goes into a non responding state and does nothing. Stays there, hours and hours. Resource Monitor shows no activity.

I've tried different USB, ports, computers..... nothing

[Torsten.]

you are using the tool included within the ISO?
Any restrictions (Group policies) regarding USB in your organisation?