ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP USB KEY UTILITY cannot process SPP-2019-03

 
ArunKanth
Occasional Advisor

HP USB KEY UTILITY cannot process SPP-2019-03

hpe usb key utility not working i tried

1)Hpe usb key ulitity latest version

2)Rufus

3)Iso to Usb

tried But No Luck

 

 

9 REPLIES 9
Torsten.
Acclaimed Contributor

Re: HP USB KEY UTILITY cannot process SPP-2019-03

On Windows?
Consider to run the tool "as Administrator"

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ArunKanth
Occasional Advisor

Re: HP USB KEY UTILITY cannot process SPP-2019-03

Tried but not working

Torsten.
Acclaimed Contributor

Re: HP USB KEY UTILITY cannot process SPP-2019-03

Consider also to compare the checksum of the ISO file.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ArunKanth
Occasional Advisor

Re: HP USB KEY UTILITY cannot process SPP-2019-03

Compare the checksum file also

run as admin aslo

still not working

R_Raj
HPE Pro

Re: HP USB KEY UTILITY cannot process SPP-2019-03

Hello ,

Please follow the steps below 

1. Download the required version of SPP .

2. Make sure USB drive used is greater than 4GB and less than  32GB .

3. Mount the SPP ISO to a PC and navigate to SPP2019030/usb/usbkey and execute the usbkey.exe as Administrator Privileges .Make sure the Usb drive is plugged in and follow the usb wizard .

In case if there is any further issue . Please share a detailed description about the error .

 

Regards

 

I am an HPE Employee
riahc3
Occasional Advisor

Re: HP USB KEY UTILITY cannot process SPP-2019-03

That doesnt work either. It freezes in a not responding state. 

Jimmy Vance
HPE Pro

Re: HP USB KEY UTILITY cannot process SPP-2019-03


@riahc3 wrote:

That doesnt work either. It freezes in a not responding state. 


The USB key utility in SPP2019030 works as expected.  I just used it to build the SPP on a generic 16GB stick.  

No support by private messages. Please ask the forum! Accept or KudoI work for HPE
riahc3
Occasional Advisor

Re: HP USB KEY UTILITY cannot process SPP-2019-03

It is not working. The process goes into a non responding state and does nothing. Stays there, hours and hours. Resource Monitor shows no activity.

I've tried different USB, ports, computers..... nothing
Torsten.
Acclaimed Contributor

Re: HP USB KEY UTILITY cannot process SPP-2019-03

you are using the tool included within the ISO?
Any restrictions (Group policies) regarding USB in your organisation?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!