ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP drives not identified as valid HPE Drives in DL380G9

Yang_Wenli
Occasional Contributor

HP drives not identified as valid HPE Drives in DL380G9

I have two DL380G9s that each have 8 146GB SAS drives, model number HPEH0146FAWJB. The RAID controller doesn't recognize them as valid HPE drives, though, and the status light on the front of both machines is flashing for attention. Can someone tell me if there's a setting or something that I'm missing? Can I get the systems to ignore the drives' HPE status, so the status light only flashes for something serious? Thanks!

2 REPLIES
Jimmy Vance
HPE Pro

Re: HP drives not identified as valid HPE Drives in DL380G9

What model RAID controller are they attached to?




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Yang_Wenli
Occasional Contributor

Re: HP drives not identified as valid HPE Drives in DL380G9

They're attached to H240AR controllers.