HPE Community
ProLiant Servers (ML,DL,SL)
1752802 Members
5700 Online
108789 Solutions
New Discussion юеВ

HP e200i missing disks

 
paul lush
Occasional Contributor

тАО04-07-2009 06:19 AM

тАО04-07-2009 06:19 AM

HP e200i missing disks

I have a e200i (w 12mb/bbwc) f/w 1.80 with 5 x WD "green" 1tb sata drives presented via break out adapters. Ive put the break out adapters onto a SC448e and the cables are working as the LSI card can see all the drives, so its not the cables.

The problem that I have is that the e200i will only "see" three of the 1tb drives at any one time. It simply will not show the 5 drives attached to the card. The 1.8 f/w says a 6tb max, which the drives are 1tb short of touching.

Has anyone seen this before or know of a fix for it?
0 Kudos
Reply
3 REPLIES 3
paul lush
Occasional Contributor

тАО04-08-2009 01:45 PM

тАО04-08-2009 01:45 PM

Re: HP e200i missing disks

no one?
0 Kudos
Reply
KarloChacon
Honored Contributor

тАО04-08-2009 04:58 PM

тАО04-08-2009 04:58 PM

Re: HP e200i missing disks

faulty e200 card?
Didn't your momma teach you to say thanks!
0 Kudos
Reply
paul lush
Occasional Contributor

тАО04-09-2009 12:39 AM

тАО04-09-2009 12:39 AM

Re: HP e200i missing disks

Works fine with 2.5" 10k SAS drives and all the 2.3 1tb drives are on a 3ware controller working just fine.

No matter combination of ports you put any of the 5 drives onto, it only recognises three at any one time
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.