HP iLO v4

[Jimmy Vance]

The port labeled Port 1 is the shared iLO port. Some OS's will call Port 1 eth1 and port 2 eth0 instead of what you would expect as port 1 being eth0 and port 2 being eth1

[Niroa]

You mean the first ethernet adaptor must be used by iLO for share the network. And that adapter also should be connected with router to connect internet?

[Torsten.]

(9) optional ILO

(10) NIC1 / shared ILO

(11) NIC2

So you need a cable connected to NIC1.

The OS and ILO are using this connection, each with an own IP address. AFAIR the limitation is that the OS cannot ping or access the ILO over this shared connection.

[Niroa]

Yes, this is the exact view of back of our server.
I will try this config and let you know. Thanks

[Niroa]

I changed the ethernet 1 to ethernet 2. Now it is ok with the internet and local hosts. everyone can works as it was before.

but iLO IP is still unknown.

thanks for the help