ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP proliant DL380 G5, No Light on Working array

 
widjajayd
Occasional Contributor

HP proliant DL380 G5, No Light on Working array

I'm Using DL380 G5,I have created logical drive and all my 8 * 146 Giga drive working
below is
port box 0 bay 0
port box 0 bay 0
port box 0 bay 0
port box 0 bay 0
port2i box 1 bay 4
port2i box 1 bay 3
port2i box 1 bay 2
port2i box 1 bay 1

the problem is All 4 hard drive on port Box 0 bay 0 don't have light activity
I can install OS (windows 2003 SP2) ALL harddrive is working and it's working
Thank you for all help

4 REPLIES
alex_sun
Frequent Advisor

Re: HP proliant DL380 G5, No Light on Working array

Backup data, use the Firmware CD 8.60 update all the firmware, reconfigure the array.
widjajayd
Occasional Contributor

Re: HP proliant DL380 G5, No Light on Working array

Thanks Alex, I did the Firmware upgrade but the problem still exist, swapped the raid cable and the result still same (I'm sure it's not problem with SAS cable)
widjajayd
Occasional Contributor

Re: HP proliant DL380 G5, No Light on Working array

I attached my problem with this picture
wobbe
Respected Contributor

Re: HP proliant DL380 G5, No Light on Working array

Your backpane is probably defective. The lights are on the backpane, not on the disks itself. This can happen, I've seen it myself on other servers. I would contact HP and have it replaced. Should be under warranty.