HP proliant DL380 Gen8.

[TalalJavaid]

I have RAID 5 Setup on my server. running SME server lunix. one of my hard drive modle no EG0300FBLSE 300GB 10k SAS is showing light with blinking amber and green which i think i have to replace.

i have the new hard drive with same configration. i.e. 300GB 10k sas

can you tell me the steps to change it. should i shut down and replace the hard drive or should I change it while its running. also give me stepts if any other setting has to be done before doing it.. 

If there is any thing. please give me detial workthrough as i am not experianced in Server. 

Thanks and regards,

[TalalJavaid]

150 views and 0 replies :-S

[TalalJavaid]

Ok, I change it while its running, it working.