HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP proliant DL380 Gen8.

 
TalalJavaid
Occasional Visitor

HP proliant DL380 Gen8.

I have RAID 5 Setup on my server. running SME server lunix. one of my hard drive modle no EG0300FBLSE 300GB 10k SAS is showing light with blinking amber and green which i think i have to replace.

i have the new hard drive with same configration. i.e. 300GB 10k sas

can you tell me the steps to change it. should i shut down and replace the hard drive or should I change it while its running. also give me stepts if any other setting has to be done before doing it.. 

If there is any thing. please give me detial workthrough as i am not experianced in Server. 

Thanks and regards,

2 REPLIES
TalalJavaid
Occasional Visitor

Re: HP proliant DL380 Gen8.

150 views and 0 replies :-S

 

TalalJavaid
Occasional Visitor

Re: HP proliant DL380 Gen8.

Ok, I change it while its running, it working.