ProLiant Servers (ML,DL,SL)

HP proliant dl120 g6 doesn't fireup

 
btr901
Frequent Visitor

HP proliant dl120 g6 doesn't fireup

Hi there!
Dear geniuses please help. The dl120 g6 doesn't work. I've just rebooted and still not working. The battery is charged, power supply is brand new, RAM is great (just checked).

https://youtu.be/EiCYX6f2P1Y

4 REPLIES 4
Suman_1978
HPE Pro

Re: HP proliant dl120 g6 doesn't fireup

btr901
Frequent Visitor

Re: HP proliant dl120 g6 doesn't fireup

Thank you for replying. I've try it with USB stick but still not. What do you think about the sound of power supply? its cycle sound like wu wu wu wu wu....this applies as old power supply and brand new

sudhirsingh
HPE Pro

Re: HP proliant dl120 g6 doesn't fireup

Hi,

 

Please follow the troubleshooting steps as per below article:

HPE ProLiant DL120 G6 Server - No POST and No Display

https://support.hpe.com/hpesc/public/docDisplay?docId=c03479375

 

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo

btr901
Frequent Visitor

Re: HP proliant dl120 g6 doesn't fireup

I've done everything according to the instructions and the same situation. I clear NVRAM via battery and still not... I disconnected all expansion from server and I had just motherboard, processor and power supply the same.
I'm so scared I think its problem with motherboard or somethink else