HPASM problems on Proliant DL380 G5

[Florian G.]

We use hpasm on some Proliant DL380 G5 servers with the OpenIPMI drivers (from Fedora Core 5) but occasionally the cmahealthd dies and we get the following messages:

/var/log/messages:Aug 19 08:42:31 cst1 hpasmlited[3162]: Failed GET SENSOR READING, sensor 9
/var/log/messages:Aug 19 08:42:31 cst1 hpasmlited[3162]: iLO 2 Communications Error - Attempting synchronization!
/var/log/messages:Aug 19 08:43:16 cst1 hpasmlited[3162]: check_ilo2: Failed to get BMC Device Id!
/var/log/messages:Aug 19 08:44:01 cst1 hpasmlited[3162]: The iLO 2 reset / synchronization process has FAILED!
/var/log/messages:Aug 19 08:44:01 cst1 hpasmlited[3162]: CRITICAL ERROR: Resetting HP Advanced System Management Stack!
/var/log/messages:Aug 19 08:44:01 cst1 hpasmlited[3162]: The iLO 2 Management Processor is not responding!
/var/log/messages:Aug 19 08:44:01 cst1 hpasmlited[3162]:
/var/log/messages:Aug 19 08:44:01 cst1 hpasmlited[3162]: CRITICAL ERROR: Resetting HP Advanced System Management Stack!

The following messages in /var/spool/compaq/cma.log are also relevant:
Aug 19 08:44:01 cst1 cmahealthd[2558]: CheckForResMemChange: IOCTL ERROR 0xffffffff
Aug 19 08:44:31 cst1 cmahealthd[2558]: ERROR: ioctl dev_cevt EVT_JALOG failed!
Aug 19 08:44:31 cst1 cmapeerd[2505]: [hpasmpeer] Disconnect agent: cmahealthd

Unfortunately, we cannot use the hp-OpenIPMI drivers, because they are only available for Redhat EL, not for Fedora. Another question: Where can i get the source code for the hp-OpenIPMI drivers so i can compile them?

Thanks in advance,
Florian George.