ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE 562SFP+: how to create virtual NICS

 
Highlighted
JanSinke
Occasional Visitor

HPE 562SFP+: how to create virtual NICS

We have a couple of HPE proliant Gen10 machines which have HPE 562SFP+ nics build in. When i read the quickspecs of this network interface it says: IEEE 802.1Q Virtual Local Area Network (VLAN) protocol allows each physical port of this adapter to be separated into multiple virtual NICs for added network segmentation

Does anyone know how i can create Virtual NICS using Windows 2019 without teaming?

 

4 REPLIES 4
Highlighted
Kashyap02
HPE Pro

Re: HPE 562SFP+: how to create virtual NICS

Hi There, 

Yes, you can create VNICs without teaming. 

1. Go to network adapter properties. 

2. Click on Configure

3. Advanced - > VLAN ID - Provide the value 

 

you can also refer to the below Intel Document: 

https://www.intel.in/content/www/in/en/support/articles/000005677/network-and-i-o/ethernet-products.html

I am a HPE Employee

Accept or Kudo

Highlighted
JanSinke
Occasional Visitor

Re: HPE 562SFP+: how to create virtual NICS

Hello Kashyap02, thanks for the answer. Unfortunately for this to work you need Intel ANS, and that is not supported for WIndows 2016 and Windows 2019. 

pragav
HPE Pro

Re: HPE 562SFP+: how to create virtual NICS

Hi JanSinke,

Yes you are correct Intel ANS is not supported on 2016 / 2019 , to use mulitple NIC's on 2016/2019 you will need to have NIC teaming.

https://www.intel.in/content/www/in/en/support/articles/000022706/network-and-i-o/ethernet-products.html

regards,

 

pragav
I work for HPE

Accept or Kudo