HPE DL380p GEN8 iLO4 Self Test Error

[Torsten.]

Next ILO-4 version 2.60 will have a button in the web interface to force the NAND format ...

[Eggman_2112]

Now thats good progress! I can't wait! Thanks for giving the update...

[DblDThe3rd]

how where?

I got this pesky problem and I cant see where to force NAND format 

running iLO4 2.60

[Torsten.]

see advisory

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00048622en_us

[SWWIT]

Hi. I try to use the Powershell Script.

How to determine the Bay Number of the Embedded Flash/SD-CARD?

Help would be appreciated.

[Torsten.]

no bay.
this is a chip on the systemboard.
ILO owns it, the OS cannot see it.

[Zakour]

Hi

You said in your reply that :  " When ILO finished coming up (no server reboot required) "

How about this step please ?

2.  Do a power-off/unplug reset

[Torsten.]

Unless you are running your OS from the internal SD card, an ILO reboot does not affect the running system.

However, meanwhile ILO version 2.60/2.61 can help you with NAND format.

Upgrade ILO to 2.61.

Login and check ILO health. If there is a problem, click on ILO health and select "Format".

After doing this, pull the power plugs (shut down your OS before!).

Then check ILO health again.

[Zakour]

Hi

If my understanding is well, I have to proceed as follow :

1- Upgrade iLo Firmware to version 2.61 (Already done)

2- Power-Off the server, remove the power cables for a couple of seconds then Power-On again the server

3- Format NAND

Am I right or missed some steps ?

Does Step 2 mandatory or Optional ?

[srinivas772]

Hi,

I got the solution from this site for below error message. 

Embedded Flash/SD-CARD : Controller firmware revision 2.10.00 NAND read failure 

https://support.hpe.com/hpsc/doc/public/display?docId=a00048622en_us 

Followed Steps from: Steps to perform a NAND format via the iLO GUI