HPE Community
ProLiant Servers (ML,DL,SL)
1753637 Members
5785 Online
108798 Solutions
New Discussion

Re: HPE ProLiant ML110 Gen10 and ESXi 6.7 - no USB passthrough ?

 
BartW
Occasional Contributor

‎03-12-2020 09:03 AM

‎03-12-2020 09:03 AM

HPE ProLiant ML110 Gen10 and ESXi 6.7 - no USB passthrough ?

Hi,

I've successfully set up a new HPE ProLiant ML110 Gen10 with ESXi 6.7U3 (as per the HPE VMWare custom image) and have installed Windows Server 2019 Standard.

Everything works fine ... except ... that I can not activate USB passthrough.  The ESXi interface simply says that the USB controllers are not supported for passthrough.  Yet this server is in the HW compatibility list for ESXi.  So what am I missing ?

BR//Bart

0 Kudos
Reply
2 REPLIES 2
sudhirsingh
HPE Pro

‎03-12-2020 09:40 AM

‎03-12-2020 09:40 AM

Re: HPE ProLiant ML110 Gen10 and ESXi 6.7 - no USB passthrough ?

Enable USB devices for passthrough instead of enabling a USB controller for passthrough.

Hope this help !

 

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo

0 Kudos
Reply
rmay_bk
Valued Contributor

‎08-31-2020 01:21 PM - last edited on ‎09-01-2020 08:25 AM by

‎08-31-2020 01:21 PM - last edited on ‎09-01-2020 08:25 AM by

Re: HPE ProLiant ML110 Gen10 and ESXi 6.7 - no USB passthrough ?

@BartW  Did you find a solution for this?  I'm curious about this model and its passthru capabilities.  

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.