HPE ProLiant ML110 Gen10 + m.2 Samsung 970 EVO 2 TB

[peterbacil]

Is this compatible?

HPE ProLiant ML110 Gen10
ASUS HYPER M.2 X16 CARD (4x M.2 SSD)
m.2 Samsung 970 EVO 2 TB

I want to boot from usb key (ESXi) and SSD use as storage for virtual computers.

Thank You
Peter, IT admin of primary school

[McCoy]

Hello,

With regards the M.2 supportability Yes it is compatibile and the supported option part number are listed in the Ml110 Gen server Quickspecs.
To install M.2 it requires additional universal enablement card kit (878783-B21) and use S100i SATA controllernonly.

For more information on supported M.2 option part numbers refer the Server quickspecs.
https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=a00021851enus

Mixed Use - SATA – M.2 - Solid State Drives
HPE 240GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD 875488-B21
NOTE: HPE Universal SATA HHHL 3yr Wty M.2 Kit (878783-B21) and use S100i SATA controller only.
NOTE: M.2 supports Software RAID only.
HPE 480GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD 875490-B21
NOTE: HPE Universal SATA HHHL 3yr Wty M.2 Kit (878783-B21) and use S100i SATA controller only.
NOTE: M.2 supports Software RAID only

"If you feel this was helpful please click the KUDOS! Thumbs below!"

[peterbacil]

Can i use also Samsung 970 EVO 2 TB SSD in  ML110 Gen10?

Thank you

[KevinSpring]

Probably not. Aside from it not being a supported HPE option, the ML110 only supports SATA on m.2, not NVME like the 970 EVO, so the system isn't designed to enumerate those drives.