ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE Proliant ML10 Gen9 Drivers

SOLVED
Go to solution
Rafay2018
Occasional Visitor

HPE Proliant ML10 Gen9 Drivers

I recently purchase a new HPE Proliant ML10 Gen9 Server. i need help to install the drivers for it. im going to install the windows server standard 2012 r2 edition. i have also setup raid unable to proceed without drivers. 

3 REPLIES
Suman_1978
HPE Pro

Re: HP Proliant ML10 Gen9 Drivers

Hi,

Here are all the drivers and for Dynamic Smart Array B140i Controller.

Thank You!
I am a HPE employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

>> Useful Links for ProLiant Servers

>> Self Solve Options for ProLiant Servers

Jimmy Vance
HPE Pro

Re: HP Proliant ML10 Gen9 Drivers

The ML10 Gen9 uses the Intel RST controller. Drivers for the B140i will not work.

 

Intel(R) Rapid Storage Technology Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2
https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=null&swItemId=MTX_4bc564b82e8841398ab6c7c1eb&swEnvOid=4184#tab1




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Solution

Re: HP Proliant ML10 Gen9 Drivers

Hello @Rafay2018

Driver list for 2012 R2

* RECOMMENDED * Intel(R) Chipset (C236) Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008772172&swItemId=MTX_9d59f3d87305486f95a7062d9e&swEnvOid=4168

 * RECOMMENDED * Intel(R) Rapid Storage Technology Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008772172&swItemId=MTX_4bc564b82e8841398ab6c7c1eb&swEnvOid=4168

 * RECOMMENDED * Intel(R) Management Engine Interface Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008772172&swItemId=MTX_0664b37070674ef98bd49a20cc&swEnvOid=4168

 * RECOMMENDED * Intel(R) Graphic Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008772172&swItemId=MTX_7d279e2905284301bf6e545074&swEnvOid=4168

 * RECOMMENDED * Intel(R) I219-LM 1Gb NIC Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008772172&swItemId=MTX_785f0d2ff7c8421992f0bb4ac7&swEnvOid=4168

 

Step by step os installation;

1. Enter server BIOS using DEL/ESC key.
2. Choose Save and exit menu
3. Choose restore default option and use F4 to save and exit.
4. Reboot the server and enter server BIOS
5. Now select Advanced menu
6. Select SATA configuration
7. Select SATA mode selection and set to RAID mode (AHCI mode would be default)
8. Go back to Advanced menu and select CSM configuration
9. Change CSM support to enable and boot option filter to Legacy only (Boot mode set to Legacy)
10. Use F4 to save and exit.
11. Reboot the server and enter into Intel rapid storage technology setup utility using CTRL+I option when prompted.
12. The hard drives detected by the controller would be listed in the page and use (option 1) Create Raid volume

Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.