HP Proliant ML10 Gen9 Drivers

[Rafay2018]

I recently purchase a new HPE Proliant ML10 Gen9 Server. i need help to install the drivers for it. im going to install the windows server standard 2012 r2 edition. i have also setup raid unable to proceed without drivers. 

[Suman_1978]

Hi,

Here are all the drivers and for Dynamic Smart Array B140i Controller.

Thank You!
I am a HPE employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

>> Useful Links for ProLiant Servers

>> Self Solve Options for ProLiant Servers

[Moderator edit: Updated the broken link]

[Jimmy Vance]

The ML10 Gen9 uses the Intel RST controller. Drivers for the B140i will not work.

Intel(R) Rapid Storage Technology Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2
https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=null&swItemId=MTX_4bc564b82e8841398ab6c7c1eb&swEnvOid=4184#tab1

[Erdogan Temur · Accepted solution]

Hello @Rafay2018

Driver list for 2012 R2

* RECOMMENDED * Intel(R) Chipset (C236) Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008772172&swItemId=MTX_9d59f3d87305486f95a7062d9e&swEnvOid=4168

 * RECOMMENDED * Intel(R) Rapid Storage Technology Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008772172&swItemId=MTX_4bc564b82e8841398ab6c7c1eb&swEnvOid=4168

 * RECOMMENDED * Intel(R) Management Engine Interface Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008772172&swItemId=MTX_0664b37070674ef98bd49a20cc&swEnvOid=4168

 * RECOMMENDED * Intel(R) Graphic Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008772172&swItemId=MTX_7d279e2905284301bf6e545074&swEnvOid=4168

 * RECOMMENDED * Intel(R) I219-LM 1Gb NIC Driver for HPE ProLiant ML10 Gen9 Servers and Microsoft Windows Server 2012 R2

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008772172&swItemId=MTX_785f0d2ff7c8421992f0bb4ac7&swEnvOid=4168

Step by step os installation;

1. Enter server BIOS using DEL/ESC key.
2. Choose Save and exit menu
3. Choose restore default option and use F4 to save and exit.
4. Reboot the server and enter server BIOS
5. Now select Advanced menu
6. Select SATA configuration
7. Select SATA mode selection and set to RAID mode (AHCI mode would be default)
8. Go back to Advanced menu and select CSM configuration
9. Change CSM support to enable and boot option filter to Legacy only (Boot mode set to Legacy)
10. Use F4 to save and exit.
11. Reboot the server and enter into Intel rapid storage technology setup utility using CTRL+I option when prompted.
12. The hard drives detected by the controller would be listed in the page and use (option 1) Create Raid volume

[duk]

thx, you save me alot of time

[AspSolutions]

Hi,

every link in your post result the follow message:

Forbidden

You don't have permission to access /hpsc/swd/public/detail on this server.

Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request.

How can I download the correct drivers for my Proliant ML10 Gen9 for Windows Server 2012 R2??

Tks in advance

Regards

[suraj2311]

you need to mode your ISO and install usb3.0 xhci drivers to be instaslled with the boot iso. 

then you can setup your system easily