ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE Proliant Server DL380 Gen 9 Unsupported processor detected

Michael7
Occasional Visitor

HPE Proliant Server DL380 Gen 9 Unsupported processor detected

Halo,

 

I have an HP Proliant DL 380 Gen 9 with an error "Unsupported processor detected". One of the steps suggested to resolve is to connect via iLO (Out-Of-Bound), however when putting my laptop on the same subnet as the server's iLO they seem not to be communicating. Anyone to assist on how i can correctly configure my network to have conne ction between my laptop and iLO

2 REPLIES
Torsten.
Acclaimed Contributor

Re: HPE Proliant Server DL380 Gen 9 Unsupported processor detected

This is straight forward.

You configure the ILO in the maintenance menu to a fixed IP address, mask and gateway and do the same with a matching IP on your laptop while using a single cable between both devices.

Example:

ILO: 192.168.1.2 mask 255.255.255.0 gw192.168.1.2

PC 192.168.1.3 mask 255.255.255.0 gw192.168.1.2

 

Then point your browser to http://192.168.1.2


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Fayez
Trusted Contributor

Re: HPE Proliant Server DL380 Gen 9 Unsupported processor detected

Hi,

 

Can we know what processors are installed?