ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE Smart Array S100i SR Gen10 - maximale Festplattengröße - 16 TB SATA-HDD wird nicht erkannt

 
Highlighted
moar70
Occasional Contributor

HPE Smart Array S100i SR Gen10 - maximale Festplattengröße - 16 TB SATA-HDD wird nicht erkannt

Hallo!

Ich habe einen HPE ML110 Gen10 zu installieren, der Kunde wollte unbedingt 2 x 16 TB HDD verbaut haben, leider werden diese vom Smart HPE Smart Array S100i SR Gen10 im Storage-Manager nicht erkannt.
Habt ihr Ahnung ob's da ein Limit gibt?

Google Translaiton 

I have to install an HPE ML110 Gen10,
the customer absolutely wanted to have installed 2 x 16 TB HDD,
unfortunately these are not recognized by the Smart HPE Smart Array S100i SR Gen10 in the Storage Manager.
Do you have any idea if there is a limit?

Danke!

LG
2 REPLIES 2
Highlighted
Cali
Honored Contributor

Re: HPE Smart Array S100i SR Gen10 - maximale Festplattengröße - 16 TB SATA-HDD wird nicht erkannt

Der S100 funktioniert nur mit Windows im UEFI Mode.
Leider fehlt die angabe vom OS in der anfrage.

Software RAID

HPE Smart Array S100i SR Gen10 SW RAID

NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. 

NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.

NOTE: The S100i supports windows only

NOTE: For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID 1 boot volume. For more information visit: https://downloads.linux.hpe.com/SDR/project/lsrrb/

 


======================
That was not planned in this way.
Highlighted
SanjeevGoyal
HPE Pro

Re: HPE Smart Array S100i SR Gen10 - maximale Festplattengröße - 16 TB SATA-HDD wird nicht erkannt

Hello,

Good Day!!

I would like to suggest you follow the below HPE HPE ProLiant ML110 Gen10 Server Quickspace because this server supports only below hard disk drives.

Also, suggest you follow the HPE ProLiant ML110 Gen10 Server - Option Parts list.

HPE ProLiant ML110 Gen10 Server Quickspace ( Page No 7)

https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=a00021851enw

 

Hard Drive Bays
• Up to 8 Non-hot plug SATA 3.5-inch drives
• 4 Hot-plug LFF SAS/SATA HDD bays; upgradable to 8
• 8 Hot-plug SFF SAS/SATA HDD bays; upgradable to 16

 

Maximum Internal Storage     Capacity Configuration Hot Plug LFF SAS 96 TB 8 x 12 TB Hot Plug LFF SATA 96 TB 8 x 12 TB Hot Plug SFF SAS 38.4 TB 16 x 2.4 TB Hot Plug SFF SATA 32 TB 16 x 2 TB Non-Hot Plug LFF SATA 32 TB 8 x 4 TB Hot Plug LFF SATA SSD 30.72 TB 8 x 3.84 TB Hot Plug SFF SAS SSD 61.44 TB 16 x 3.84 TB Hot Plug SFF SATA SSD 61.44 TB 16 x 3.84 TB HPE ProLiant ML110 Gen10 Server - Option Parts

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00028326en_us#N10337

I would suggest you use only supported components in the server.

Please feel free to contact me if you have any further questions or concerns.

If you feel this was helpful please click the KUDOS! thumb below!  

Regards,

 

 


I am a HPE Employee

Accept or Kudo