ProLiant Servers (ML,DL,SL)
1748117 Members
3606 Online
108758 Solutions
New Discussion

Re: HPE Smartupdate ISSUE: Add Node failed for Node - localhost Reason: Failed to retrieve OS detail

 
Thiyagu1093
Occasional Contributor

HPE Smartupdate ISSUE: Add Node failed for Node - localhost Reason: Failed to retrieve OS details

Hi Team,

We are trying to update the firmware using smartupdate cli,

We are following the below steps and we are facing the issue like not able to activate and reboot after deploying the firmware. 

Please help us with the correct steps if we missed and suggest us with the soution.

Steps are:

sudo ./smartupdate add --nodes <nodeip> --username="<username>" password="<password>"

sudo ./smartupdate add --baselines "<baselinepath>

sudo ./smartupdate inventory --nodes <node_ip> --baselines "<homedir>/packages/"

 

sudo ./smartupdate deploy --nodes 10.1.213.133
Copying sum files to /var/tmp/localsum
Deploy in progress...................
1. 10.1.213.133
Status: Some of the components have been staged on iLO Repository and requires a reboot to be activated

sudo ./smartupdate activate --nodes <nodeip>

Activate in progress..
Activated <node_ip> failed. (Cannot perform the operation now. Reason: Activate command does not apply to to Node type : ILO)

sudo ./smartupdate --s --reboot_always

Copying sum files to /var/tmp/localsum

Add Node failed for Node - localhost Reason: Failed to retrieve OS details for Remote Node:
Sending Shutdown request to engine
Waiting for engine to shutdown
Successfully shutdown the service.
SUM engine process handle is null

 

Thanks,

Thiyagu

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: HPE Smartupdate ISSUE: Add Node failed for Node - localhost Reason: Failed to retrieve OS detail

Obviously you sent the updates to the ILO5 repository of a Gen10 blade.

You probably need to reboot the server manually now - this probably depends on some other settings within ILO.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Thiyagu1093
Occasional Contributor

Re: HPE Smartupdate ISSUE: Add Node failed for Node - localhost Reason: Failed to retrieve OS detail

Hi Torsten,

We are looking for a way to update firmware components without any single manual intervention.

We are trying to find reboot options either using smartupdate cli console commands or api's instead of doing it manualy?

could you please help us on this?

Thanks,

Thiyagu

Torsten.
Acclaimed Contributor

Re: HPE Smartupdate ISSUE: Add Node failed for Node - localhost Reason: Failed to retrieve OS detail

It is a bit more complicated now. More secure too ...

As said, it depends on the method you used.

 

From SUM 8.2.0 User Guide:

 

iLO 5 update options
Gen10 servers with iLO 5 allow you to update the servers two ways:
• Deploy updates through the operating system with SUM.
• Deploy updates through the iLO 5. SUM loads the updates to the iLO 5. iSUT deploys the updates
based on the iSUT mode. This requires:
◦ Integrated Smart Update Tools 2.0.0.0 or later
◦ AMS management tools
For more information about iSUT, see
http://www.hpe.com/info/sut-docs.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!