ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HPSim & Blade enclosure

john_347
Regular Advisor

HPSim & Blade enclosure

Running HPSim 4.2 and have new blade enclosure running BL20p G3 with ESX 2.5. Have loaded new management module update 2.10 to enclosure & have Insight clients on Hosting servers.

Problem;- New enclosure,power supplies and blade servers do not show up properly with the exception of one blade which is displayed with correct information and is listed in enclosure. Have we missed something..

Grateful for any help
3 REPLIES
David Claypool
Honored Contributor

Re: HPSim & Blade enclosure

If you have discovered the Gbe2 switches, go into the systems list and delete them. There is a firmware update in the works for the switches that will correct a problem in the way they report themselves which breaks the associations in HP SIM.
john_347
Regular Advisor

Re: HPSim & Blade enclosure

Hi Claypool,

Many thanks for your responce.. We have reloaded agents on blades, information now displayed, but I understand that the enclosures do not display all the information re state, power etc.



john_347
Regular Advisor

Re: HPSim & Blade enclosure

Cheers for the help again

jc