ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Hangs at "attemping to boot from c:"

Ayman Altounji
Valued Contributor

Hangs at "attemping to boot from c:"

Hi all
A customer shut down a DL380G2 (5 x 18.2gb wu3 10K in a single RAID5 set hanging off a 5300). When it was rebooted 5 hours later it hung on attempting to boot from C: Nothing was changed on or added to the server. Has anyone come accross this before? Any ideas appreciated.I tried a new array controller with no effect. I also put the disks into a new G2, both with the new controller and the old controller, both with no effect.
1 REPLY
Ayman Altounji
Valued Contributor

Re: Hangs at "attemping to boot from c:"

Hi, first you want to upgrade the firware of the system board and then the array controller 5300 firware. Check cable for bent pins and bad cable. But the firware might to it. If not you might want to upgrade the SCU. Hope this will help