ProLiant Servers (ML,DL,SL)
1745833 Members
4482 Online
108723 Solutions
New Discussion

Re: Hard Disk Firmware

 
RShalders
New Member

Hard Disk Firmware

We have a ProLiant DL380 G6 Server, and one of the hard drives showed off a orange light. After doing research I found out that is could be a firmware problem. I tried to get the firmware, but there is no website available to get the firmware. Are there any suggetions?

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: Hard Disk Firmware

most likely this means the diask has failed.

Check the status by using SSA/ACU or press F5 during boot when the controller message appears.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!