HPE Community
ProLiant Servers (ML,DL,SL)
1751688 Members
3060 Online
108781 Solutions
New Discussion

Re: Hard Drive Caddy / Tray for ML110 Gen9?

 
marviva
Occasional Contributor

‎01-28-2016 07:40 AM

‎01-28-2016 07:40 AM

Hard Drive Caddy / Tray for ML110 Gen9?

Hi,
our new ML110 Gen9 server does not include the hard drive caddy / tray as with the ML310 Gen8.

My question is if the Gen8 caddy / tray work for the Gen9 cage? This are LFF (3.5") NHP (Non Hot Plug)

Many thanks

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎01-28-2016 07:48 AM

‎01-28-2016 07:48 AM

Re: Hard Drive Caddy / Tray for ML110 Gen9?

The drive caddy is always different for non hot plug drives.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.