ProLiant Servers (ML,DL,SL)
1751738 Members
5860 Online
108781 Solutions
New Discussion

Re: Hard drive not shown

 
Rhis
Visitor

Hard drive not shown

Hello guys,

I'm trying to install windows server 2012 on a new HP proliant ml350 gen10.

There's two hard drivers in it, but they are not shown in the installation list (the screen where I have to pick a hard drive to install windows o).

Like I said, it is the first installation on this server, can you provide me with help, or detailled instruction for what I have to do to solve this issue

4 REPLIES 4
FabioC1
HPE Pro

Re: Hard drive not shown

Hi, 

First you need enable SATA controller in BIOS.

Procedure 1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > SATA Controller Options > Embedded SATA Configuration.

2. Ensure that you are using the correct ACHI or RAID system drivers for your SATA option.

3. Select a setting. • • Enable Dynamic Smart Array RAID Support—Enables the embedded chipset SATA controller for Dynamic Smart Array RAID.

4. Save your setting.

https://content.etilize.com/User-Manual/1044956364.pdf

After Create Array, and last install SO by Intelligent Provisioning

Configuring the server and installing an operating system look in User Guide of

https://support.hpe.com/hpsc/doc/public/display?docId=a00017037en_us

 

 

FabioC1 - HPE Pro

Accept or Kudo

Rhis
Visitor

Re: Hard drive not shown

Thank you sir for the quick reply but,

Under  System Options I cannot loacte SATA Controller Options .

PS: I'm trying the installation on offline mode is that possible ?

FabioC1
HPE Pro

Re: Hard drive not shown

Is possible, install off line, booting by ISO of Microsoft.

But you need change boot orther to LEGACY BIOS

 

FabioC1 - HPE Pro

Accept or Kudo

Jimmy Vance
HPE Pro

Re: Hard drive not shown


@Rhis wrote:

Hello guys,

I'm trying to install windows server 2012 on a new HP proliant ml350 gen10.

There's two hard drivers in it, but they are not shown in the installation list (the screen where I have to pick a hard drive to install windows o).

Like I said, it is the first installation on this server, can you provide me with help, or detailled instruction for what I have to do to solve this issue


Before anyone can assist, we need to know what disk controller you are working with as there are a few different options.

 

No support by private messages. Please ask the forum!