ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Hard reboot steps for HPE ProLiant DL380 Generation 9

kirk3
Occasional Visitor

Hard reboot steps for HPE ProLiant DL380 Generation 9

Hello Team,

A customer of ours rebooted the HPE ProLiant DL380 Generation 9 server using the command reboot. After checkign later, we found that all the LED status button in the back are showing green. However, we are not able to ssh to the server and we also tried to physicall connect a monitor to the server but it shows blank. It seems the only option we have now is to do a hard reboot. Unfortunately also we don't have ILO configured and also UID is off. please share with us steps for hard reboot of HPE ProLiant DL380 Generation 9.

 

Thanks

1 REPLY
Suman_1978
HPE Pro

Re: Hard reboot steps for HPE ProLiant DL380 Generation 9

Hi,

To do a hard reset in your case, someone has to be near the server.

Shutdown the server, remove Power Cables, wait for two minutes then plug back and turn on the server.

For your reference:
https://support.hpe.com/hpsc/doc/public/display?docId=mmr_kc-0128682
https://support.hpe.com/hpsc/doc/public/display?docId=mmr_kc-0122452

Thank You!
I am a HPE employee
_________________________________________
Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
// Useful Links for ProLiant Servers / Community FAQ / Rules of Participation / Servers Blog //