ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Health Status: Configuration Required - Tape Drive detected

Daniel2604
Advisor

Health Status: Configuration Required - Tape Drive detected

Hi,

 

i have a proliant ml350 gen 9 server with additional H2400 Smart HBA controller.

 

After connection a HP LTO-4 Tape Drive, I got everytime an informal message, when starting the server.

 

What I need to do, for the required configuration?

 

greetings dutch

3 REPLIES
JussiH
Occasional Visitor

Re: Health Status: Configuration Required - Tape Drive detected

Hi,

 

We have exactly same issue here with our brand new server.

 

ML350 gen9, H240 controller and Ultrium 920 tape drive connected to the controller. As soon as we disconnect the tape drive, this message disappears.

 

So far I haven't been able to find solution on this.

 

-Jussi

Torsten.
Acclaimed Contributor

Re: Health Status: Configuration Required - Tape Drive detected

This may help:

 

http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/Gen9-H240-Set-HBA-Mode-for-Tape/td-p/6732871#.VXbpl0bQpHU

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
JussiH
Occasional Visitor

Re: Health Status: Configuration Required - Tape Drive detected

Thanks for the tip. Our controller is already running in HBA mode, so it has to be something else.

 

best regards,

Jussi