ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Hello, Help me config RAID for HP Proliant ML150 G5 please.

 
SOLVED
Go to solution
sang_5
Occasional Contributor

Hello, Help me config RAID for HP Proliant ML150 G5 please.

- I have two blank SATA HARD DRIVE 1TB in size and HOT-PLUG HDD cage in server.

- I read the manual and this is what i understand:

+)Install firmware of server, hard drive, Card Raid.

+)Insert Windows Server 2003 Disk and press F2 to install "Driver of Card Raid" and then install windows....

+)Use ORCA to creat RAID

- Is that right how to creat RAID ? Help me please.

Thank you very much.
3 REPLIES
Solution

Re: Hello, Help me config RAID for HP Proliant ML150 G5 please.

Hi Sang,

Onboard SATA controller card for raid configration solution below..

Enabling SATA RAID functionality in the BIOS Setup Utility:
1. Boot the server, and then press F10 to enter the ROM-Based Setup Utility (RBSU).
2. Go to the Advanced tab.
3. Enter the Advance Chipset Control .
4. Set up the SATA as Enable and the SATA RAID as Enable .
5. Press F10 , Save and Exit .
6. Reboot the server.
7. During post, f8 will now show up for the embedded SATA setup.
Creating the RAID volume:
1. Enter the Array Configuration Utility.
2. Enter Create array .
3. Create the raid volume. Select the Hard Drives .
4. Choose RAID 1 , and enter Array Label , Create RAID Via as Quick Init .
5. Exit the SATA setup.
Using the driver while installing Microsoft Windows Server 2003:
1. Download from HP the SATA Controller Driver:
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
sang_5
Occasional Contributor

Re: Hello, Help me config RAID for HP Proliant ML150 G5 please.

Thank you very much, Jawserdi.

My server shipped with "HP E200 Storage Controller". Is it "Onboard Sata Controller RAID " ?

Am I insert two SATA Hard Drive in "HOT-PLUG HDD CAGE" and then do like what you told me, right?


marcus1234
Honored Contributor

Re: Hello, Help me config RAID for HP Proliant ML150 G5 please.