HPE Community
ProLiant Servers (ML,DL,SL)
1752762 Members
5218 Online
108789 Solutions
New Discussion

Host System does not support PCI Data Bus Parity Checking

 
Ayman Altounji
Valued Contributor

‎05-22-2001 04:00 PM

‎05-22-2001 04:00 PM

Host System does not support PCI Data Bus Parity Checking

I have a new ML370 running WINNT 4.0 SP6a, 4-9.1GB 10K Ultra3 Raid 5 with online spare. When the server boots I recieve the following message "Host system does not support PCI Data Bus Parity Checking". This message is displayed after the memory count and before the server sees the array controller (SmartArray 221). The array controller is in slot 2. I updated the Bios to 8/24/00 but message still appears. Any insight would be appreciated.

TIA
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎08-23-2001 04:00 PM

‎08-23-2001 04:00 PM

Re: Host System does not support PCI Data Bus Parity Checking

I've got exactly the same problem with a ML370 - Rack mounted. The configuration is different in that I'm using 2RAID controllers and Win2000: Smart SL2 = 2x18GB RAID1 and a 5300 with 4x36GB RAID5. Any feedback highly appreciated. Regards Maurice Luethi.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.