ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How can I do a Raid 1 on ML350G5

 
SOLVED
Go to solution
uksupernova
Occasional Visitor

How can I do a Raid 1 on ML350G5

Hello everyone, my client buy a ML350 G5 with 6 146gb disks. I have to configure 2 disks in RAID 1, and 4 disks in RAID 1+0.
When I enter to the RAID utility, only shows on the screen the options RAID 0, RAID 1+0 and RAID 5. So, the question is, How can I do a RAID 1?? It´s possible?? Or the Controller not supports RAID 1??
I apprecciate all the help that you can give me, ´cause I´m totally lost and don´t know how to do it.

Thank you so much
4 REPLIES 4
Taifur
Respected Contributor
Solution

Re: How can I do a Raid 1 on ML350G5

Hi,
If RAID 1 is not present in RAID utility, so you can not dot it.

The better procedure is 2 HDD in RAID1+0
4HDD in RAID5 , you can talk with your client for this procedure.

If it helps, pls assign point

Rgds//
Taifur
Taifur
Respected Contributor

Re: How can I do a Raid 1 on ML350G5

Hi,
chek below link for support matrix for RAID level and array controller.

http://h18000.www1.hp.com/products/servers/proliantstorage/arraycontrollers/index.html

Rgds//
Taifur
Steven Clementi
Honored Contributor

Re: How can I do a Raid 1 on ML350G5

Select RAID 1+0.

On a Smart Array Controller (assuming you have a Smart Array), RAID 1+0 is effectively the same as RAID1 when you have only 2 disks in an Array.

That being said, your configuration could/should looke like:

Array 1: 2 disks
Logical Drive 1: :RAID 1+0

Array 2: 4 disks
Logical Drive 1: :RAID1+0


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
uksupernova
Occasional Visitor

Re: How can I do a Raid 1 on ML350G5

Thank you, yesterday I thinking that i´sn´t possible if the controller don´t show the RAID, but now I´m sure of it