ProLiant Servers (ML,DL,SL)
1748171 Members
4245 Online
108758 Solutions
New Discussion юеВ

How can I solve this ploblem ?

 
SOLVED
Go to solution
Supparurk S.
New Member

How can I solve this ploblem ?

1777-Slot 0 Drive Array - Proliant Storage Enclosure Problem Detected.
SCSI Port 2: Overheated Condition Detected

5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: How can I solve this ploblem ?

Cool down the room.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
wobbe
Respected Contributor

Re: How can I solve this ploblem ?

Make sure there are no empty slots in the enclosure.
Proliant Watch
Valued Contributor
Solution

Re: How can I solve this ploblem ?

1777 Error Message Error Message: 1777-Slot X Drive Array - ProLiant Drive Storage Enclosure Problem Detected... (followed by one or more of the following):

SCSI Port Y: Cooling Fan Malfunction Detected

SCSI Port Y: Overheated Condition Detected

SCSI Port Y: Side-Panel must be Closed to Prevent Overheating

SCSI Port Y: Redundant Power Supply Malfunction Detected

SCSI Port Y: Wide SCSI Transfer Failed

SCSI Port Y: Interrupt Signal Inoperative

SCSI Port y: Unsupported ProLiant Storage System Detected
Audible Beeps: None
Possible Cause: Environment threshold was violated on the drive enclosure.
Action: Check cooling fan operation by placing a hand over the fan.
Be sure the internal plenum cooling fan in tower servers or storage systems is operational.
If the fan is not operating, check for obstructions and check all internal connections.
Replace unit side panel if removed.
Check the LEDs. If the ProLiant Storage System power LED is amber instead of green, this indicates a redundant power supply failure.
If the message indicates to check SCSI cables:
Compare the cabling against the diagrams in the HP Smart Array Controller User Guide.
If the routing is correct, replace cables on the specified port until the POST error message is eliminated.


http://hpproliant.blogspot.com/2010/06/hp-proliant-bl-dl-and-ml-servers-hp.html
Torsten.
Acclaimed Contributor

Re: How can I solve this ploblem ?

What type of enclosure is it?



IMHO the message says all:

SCSI Port Y: Cooling Fan Malfunction Detected

SCSI Port Y: Overheated Condition Detected

SCSI Port Y: Side-Panel must be Closed to Prevent Overheating


Close the panel, replace the fan.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Supparurk S.
New Member

Re: How can I solve this ploblem ?

Thanks for all comments. Close the panel to fix this problem.