Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How can i entry to ILO Configuration Options for HP Proliant ML10

hpnetuser
Occasional Visitor

How can i entry to ILO Configuration Options for HP Proliant ML10

I just buy new Server [HP ML10 E3-1220v2]

When i powered on the Server. ILO Message is appeared like this picture [url=http://www.uppic.org/share-EB35_53EC4177.html][img]http://www.uppic.org/image-EB35_53EC4177.jpg[/img][/url]

 

but it doesn't show any ILO Boot Option that should be [F8]

 

how i can fix this problems and enter to ILO Configuration screen.

 

 

Thank in advance

 

 

1 REPLY
Highlighted
Torsten.
Acclaimed Contributor

Re: How can i entry to ILO Configuration Options for HP Proliant ML10

Try to override the security by switching the dip switch 1:

 

ProLiant ML10 Server User Guide - http___h20566.www2.hp.com_portal_site_hpsc_.jpg


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!