ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How can rebuild RAID1 after one of the disks is damaged in a HP Proliant DL320 G5?

jhon0622
Occasional Visitor

How can rebuild RAID1 after one of the disks is damaged in a HP Proliant DL320 G5?

 
3 REPLIES
PGTRI
Honored Contributor

Re: How can rebuild RAID1 after one of the disks is damaged in a HP Proliant DL320 G5?

hi,

 

Please provide info about the storage controller. Is it the onboard one or you have an add. PCI card?

 

regards,

 

 

How to Say Thank You? Just click the KUDOS!
Goutham_Sabala
Esteemed Contributor

Re: How can rebuild RAID1 after one of the disks is damaged in a HP Proliant DL320 G5?

Damaged meaning failed hard drive on the server?
Was the post useful? Say thanks by clicking the white KUDOS Star!
Goutham Sabala

Re: How can rebuild RAID1 after one of the disks is damaged in a HP Proliant DL320 G5?

 

 

Serial ATA hot-plug capability and drive LEDs are not supported by the DL320 G5 embedded SATA storage controller. Hence, to rebuild the RAID array, power down the server, replace the defective hard drive, and then power it on to start the RAID re-build.

 

Regards,

 

Vijayasarathy

I work for HP
To say thanks click the white "thumbs up" icon below!!!