ProLiant Servers (ML,DL,SL)
1747980 Members
4454 Online
108756 Solutions
New Discussion юеВ

Re: How do I enable VT in a ProLiant BL480c Blade Server

 
SOLVED
Go to solution
andrewes
New Member

How do I enable VT in a ProLiant BL480c Blade Server

I am struggling to understand how to enable Intel VT on this server. If anyone could provide steps on how to do this it would be much appreciated.

I understand that it should be doable via the BIOS, however I cannot find the option. I have checked the HP site, and this server is VT capable.
6 REPLIES 6
YAQUB_1
Respected Contributor
Solution

Re: How do I enable VT in a ProLiant BL480c Blade Server

Hi,

U can go through the below URL link:-

http://h20219.www2.hp.com/ERC/downloads/4AA1-7906ENW.pdf

Hope it will help 4 U.

BR/
Yaqub
melvyn burnard
Honored Contributor

Re: How do I enable VT in a ProLiant BL480c Blade Server

nothing to do with HP-UX, moving to more appropriate forum
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Blazhev_1
Honored Contributor

Re: How do I enable VT in a ProLiant BL480c Blade Server

hi,

in RBSU -> Advanced Options -> Processor options.

check page 32 :

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00191707/c00191707.pdf?jumpid=reg_R1002_USEN

If problem persists, update the System ROM.
If again, the CPUs don't support IVT.

Regards

RaMpaNTe
Trusted Contributor

Re: How do I enable VT in a ProLiant BL480c Blade Server

Hi, which processor are you using on that box?
Intel 5300, 5100, and 5000 Series processors are 64-bit and support Intel VT.
You heve a question... I have an aswer!!!
andrewes
New Member

Re: How do I enable VT in a ProLiant BL480c Blade Server

Hi again, the Xeon 5300 series.

YAQUB: Your answer was exactly what I was looking for! Thanks :)
andrewes
New Member

Re: How do I enable VT in a ProLiant BL480c Blade Server

Thankyou for your answer YAQUB - it was exactly what I was looking for.