ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How do I get RAID 1 on P410i Controller?

 
Ravi Chhabra
Occasional Visitor

How do I get RAID 1 on P410i Controller?

I have a HP Proliant DL360 G6 with P410i. Both in the Bios and ACU I can't find any options for RAID 1. The cache ratio also shows as 0%Read/0%Write. Does that mean anything?
3 REPLIES
TTr
Honored Contributor

Re: How do I get RAID 1 on P410i Controller?

Do you anything in the BIOS/ACU? You mentioned ACU so you must have an OS on it (Windows?). What do you see about the disks and the LUNs?

Or better yet, hoy many disks do you have/see?
Ravi Chhabra
Occasional Visitor

Re: How do I get RAID 1 on P410i Controller?

There are only two options in Bios:

[ ] Raid 1+0
[ ] Raid 0

And there's an option for a Spare, and another option to change MBR from 4GB to 8GB.

In ACU there is only an option for doing an Array. There's no RAID 1. The cache setting is disabled. Should that be enabled? Also is it possible for a ZMR to do RAID 1?
Jimmy Vance
HPE Pro

Re: How do I get RAID 1 on P410i Controller?

Select RAID 1+0 in ORCA or ACU



__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!