HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to Get the Data of HP ML350 G6 Server, Failed MotherBoard with 3 Hard Disk - RAID5

 
mujeeb_mohd
Occasional Contributor

How to Get the Data of HP ML350 G6 Server, Failed MotherBoard with 3 Hard Disk - RAID5

I have a HP ML 350G6 Server for which Mother Board got failed with 3 Hard Disk Configured as RAID5. How can I retreive my data from those hard disk. I got another Server HP ML 380 G7 Server, If i put the Hard Disk of my Old Server, can i able to boot it and recover my data. Please Help !!

 

 

P.S.This thread has ben moved from Community Feedback & Suggestions to ProLiant Servers (ML,DL,SL) - HP Forums Moderator

1 REPLY
Johan Guldmyr
Honored Contributor

Re: How to Get the Data of HP ML350 G6 Server, Failed MotherBoard with 3 Hard Disk - RAID5

The ML350 G6 and DL380 G7 both have HP Smart Arrays by default (AFAIK there is no ML380 G7). With Smart Array the config is also stored on the disk. So if you move the disks to another server, the controller should find the RAID config on the disks. Probably best if they disks are in the same order as on the ML350 G6 - should they also be in the same "port"?