How to Install HPE Smart Storage Administrator on Microserver Gen10plus

[werner.zeller]

Hi, on a new Microserver with Windows Server 2019 installed, I need the  Smart Storage Administrator Uitility for checking the Raid 1 with 2 SATA Disks. The Smartarray is the integrated Software ~B120. I did install cp029559 (HPE Smart Storage Administrator (HPE SSA) for Windows 64-bit Package) but with that the SSA console an nt see the disks. Do I have the wrong version?

Thanks for your help!

Best regards

werner

[Torsten. · Accepted solution]

This server has a HPE Smart Array S100i SR Gen10 by default, works only in UEFI mode with windows.

Try this:

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_891c6d6803044e5db3e0c2a5ab

[SanjeevGoyal]

Hello,

As per the product specification  HPE Smart Array S100i SR Gen10 integrated SA controller, not B120.

Follow the below Microserver Gen10plus Quick space.

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00073554enw#

Follow the HPE Smart Array SR Gen10 Configuration Guide for installing Smart Storage Administrator

http://itdoc.hitachi.co.jp/manuals/ha8000v/hard/Gen10/SA/882375-002_en.pdf

HPE Smart Storage Administrator (HPE SSA) for Windows 64-bit

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_891c6d6803044e5db3e0c2a5ab#tab-history

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

[werner.zeller]

Thanks, a lot, with the right file, it has worked fine!

Thanks!

Best regards Werner

[SanjeevGoyal]

Hello,

Please let me know if you have any queries.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,