HPE Community
ProLiant Servers (ML,DL,SL)
1752511 Members
5340 Online
108788 Solutions
New Discussion

How to Save and Restore the configuration of Smart Array Controller

 
John Stamos
New Member

‎07-17-2003 01:36 AM

‎07-17-2003 01:36 AM

How to Save and Restore the configuration of Smart Array Controller

We have a Proliant ML350 PIII 866Mhz with Smart Array Controller 431 .We need to upgrade the disks of array with 3 new 72GB!In case that i ll have problem with the new disks how could i restore the old configuration with old disks? and how can i save first the configuration!! Please contact me asap the work is pending!!!!!thankssssss!
0 Kudos
Reply
1 REPLY 1
Martin Breidenbach
Honored Contributor

‎07-17-2003 03:04 AM

‎07-17-2003 03:04 AM

Re: How to Save and Restore the configuration of Smart Array Controller

The array configuration is written to the hard drives. So if you shut down, switch off, replace drives and switch on it should read the configuration from the drives.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.