ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to add extra SAS hot plug drive on a ML 350 G6 running Windows 2012 server

mbeko
Occasional Visitor

How to add extra SAS hot plug drive on a ML 350 G6 running Windows 2012 server

How do i get to see a drive that is plugged in and shows online status when i log into ML 350 G6 running windows 2012 server under disk management.

 

do i need special drivers to see it? i did not use any drivers with the one in use.

 

please help

 

 

1 REPLY
Torsten.
Acclaimed Contributor

Re: How to add extra SAS hot plug drive on a ML 350 G6 running Windows 2012 server

It is most likely connected to a smart array controller, so you should run ACU in order to configure it.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!