ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to change SATA Controller Options from the CLI RBSU BIOS INTERFACE MODE with a ML10 v2 Server?

 
ML110
Occasional Contributor

How to change SATA Controller Options from the CLI RBSU BIOS INTERFACE MODE with a ML10 v2 Server?

HP ProLiant ML10 v2 Server SN: CN65250CR1

Hello everybody,

I bought a bunch of HP ProLiant ML10 v2 servers to work as Ceph RBD cluster, to replace my HP ProLiant ML110 G7 cluster as they where making to much noise above 24 degrees Celcius and I could not fix it by replacing the termal paste or disabling iLO.

Where can I find the bellow options when accessing the RBSU over iLO and VSP?

BIOS GRAPICAL INTERFACE MODE
System Options -> SATA CONTROLLER OPTIONS -> Embedded SATA Configuration -> Enable SATA AHCI Support
System Options -> SATA CONTROLLER OPTIONS -> Drive Write Cache -> Disabled

Also how to choose from which of the four installed harddrives to boot from?

Kind regards,

Jelle de Jong
GNU/Linux Consultant.

rbsu> SHOW SYS
HP ProLiant ML10 v2
S/N: CN65250CR1
Product ID: 816710-001
HP BIOS J10 02/02/2015
Backup Version 02/02/2015
Bootblock 02/04/2012

16384MB Memory Configured

Proc 1:Intel 3.10GHz,8MB L3 Cache

MAC address for NIC 1: 308D99CB03D8
MAC address for NIC 2: 308D99CB03D9

User Defined Defaults - Disabled

rbsu> SHOW CONFIG OPTIONS
NUMLOCK Power-On State
Virtual Serial Port
USB Port Controller Routing
USB Control
USB Boot Support
USB Drive Key Enumeration
ASR Status
ASR Timeout
Thermal Shutdown
Wake-On LAN
POST F1 Prompt
Power Button
Automatic Power-On
Power-On Delay
BIOS Serial Console Port
BIOS Serial Console Baud Rate
EMS Console
BIOS Interface Mode
No-Execute Memory Protection
Intel(R) Virtualization Technology
Intel(R) Turbo Boost Technology
Intel(R) VT-d
NIC 1 Boot Options
NIC 2 Boot Options
MPS Table Mode
ROM Selection
NMI Debug Button
PCI Bus Padding Options
Power-On Logo
F11 Boot Menu Prompt
Network Boot Retry Support
HP Option ROM Prompting
Reset on Boot Device Not Found
HW Prefetcher
Adjacent Sector Prefetch
DCU Streamer Prefetcher
DCU IP Prefetcher
Node Interleaving
Intel NIC DMA Channels
ACPI SLIT Preferences
Video Options
Remote Graphics Mode
Thermal Configuration
Asset Tag Protection
Save User Defaults
Erase User Defaults
Restore Default System Settings
Restore Settings/Erase Boot Disk
HP Power Profile
HP Power Regulator
Intel QPI Link Power Management
Minimum Processor Idle Power Core State
Minimum Processor Idle Power Package State
Maximum Memory Bus Frequency
Memory Interleaving
Maximum PCI Express Speed
Dynamic Power Savings Mode Response
Collaborative Power Control
DIMM Voltage Preference

rbsu> SHOW CONFIG SCRIPT
SET CONFIG NUMLOCK Power-On State Off
SET CONFIG Virtual Serial Port COM 1; IRQ4; IO: 3F8h-3FFh
SET CONFIG USB Port Controller Routing USB 3.0 Controller
SET CONFIG USB Control USB Enabled
SET CONFIG USB Boot Support Enabled
SET CONFIG USB Drive Key Enumeration Enabled
SET CONFIG ASR Status Disabled
SET CONFIG ASR Timeout 10 Minutes
SET CONFIG Thermal Shutdown Enabled
SET CONFIG Wake-On LAN Enabled
SET CONFIG POST F1 Prompt Enabled
SET CONFIG Power Button Enabled
SET CONFIG Automatic Power-On Always Power On
SET CONFIG Power-On Delay Random Delay
SET CONFIG BIOS Serial Console Port COM 1; IRQ4; IO: 3F8h-3FFh
SET CONFIG BIOS Serial Console Baud Rate 115200
SET CONFIG EMS Console Disabled
SET CONFIG BIOS Interface Mode Auto
SET CONFIG No-Execute Memory Protection Enabled
SET CONFIG Intel(R) Virtualization Technology Enabled
SET NUMBER Processor Core Disable (Intel Core Select) 0
SET CONFIG Intel(R) Turbo Boost Technology Enabled
SET CONFIG Intel(R) VT-d Enabled
SET CONFIG NIC 1 Boot Options Disabled
SET CONFIG NIC 2 Boot Options Disabled
SET CONFIG MPS Table Mode Full Table APIC
SET CONFIG ROM Selection Use Current ROM
SET CONFIG NMI Debug Button Enabled
SET CONFIG PCI Bus Padding Options Enabled
SET CONFIG Power-On Logo Disabled
SET CONFIG F11 Boot Menu Prompt Enabled
SET CONFIG Network Boot Retry Support Enabled
SET CONFIG HP Option ROM Prompting Enabled
SET CONFIG Reset on Boot Device Not Found Enabled
SET CONFIG HW Prefetcher Enabled
SET CONFIG Adjacent Sector Prefetch Enabled
SET CONFIG DCU Streamer Prefetcher Enabled
SET CONFIG DCU IP Prefetcher Enabled
SET CONFIG Node Interleaving Disabled
SET CONFIG Intel NIC DMA Channels Enabled
SET CONFIG ACPI SLIT Preferences Disabled
SET CONFIG Video Options Optional Video Primary, Embedded Video Disabled
SET CONFIG Remote Graphics Mode Disabled
SET CONFIG Thermal Configuration Optimal Cooling
SET CONFIG Asset Tag Protection Unlocked
SET CONFIG HP Power Profile Custom
SET CONFIG HP Power Regulator OS Control Mode
SET CONFIG Intel QPI Link Power Management Enabled
SET CONFIG Minimum Processor Idle Power Core State C6 State
SET CONFIG Minimum Processor Idle Power Package State Package C6 (non-retention) State
SET CONFIG Maximum Memory Bus Frequency Auto
SET CONFIG Memory Interleaving Full Interleaving
SET CONFIG Maximum PCI Express Speed Maximum Supported
SET CONFIG Dynamic Power Savings Mode Response Fast
SET CONFIG Collaborative Power Control Disabled
SET CONFIG DIMM Voltage Preference Optimized for Performance
SET IPL C: 2
SET IPL A: 4
SET IPL CD 3
SET IPL USB 1
SET BOOT 01 0D333C10 00 00 1F 02