How to change to AHCI mode in DL380 gen 7?

[heloooooo]

I encountered an error while installing the OS of the DL380 gen7, and I saw a message asking to change the mode to AHCI.

I can't find the options introduced in gen8~10.

There are some stories that gen7 does not support AHCI mode, so I would like to know if it is possible or how to change it if possible.

[Suvamay]

Hello, 

Please find the same in the BIOS. Please find the below option.

[heloooooo]

Thanks for answering my question.

I have tried installing the SATA driver and nothing happens.

I don't know if I'm wrong or the driver is wrong.

I tried to install SATA by loading the driver from the OS installation CD and there was no reaction. There are also errors and phrases that have been processed normally.

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_88fc4cead4ee433cb69e5e2afb&swEnvOid=4138#tab1

I tried through the file in the link here, and the SATA activation tab that gave me the answer doesn't seem to be visible on my server.

I will attach a picture.

Thank you.

[Suvamay]

Hello @heloooooo 

I have seen your other post, Ibelieve issue has been resolved.

Thanks