How to clear NVRAM on HP ML110 G4?

[RayWagner]

Hi!

My HP ML110 G4 server has problems. After the BIOS updating System Board LED indicator CR7 is RED indicating an error has occurred.  Fans Spin, No Video on the screen. I excluded from it all components: memory, RAID controller, ILO card, etc. But it didn't help.

Maybe will clearing NVRAM help me?

[Marko71]

Hi,

To clear system configuration, disconnect AC power and press the CMOS button (SW50 on motherboard).

Hope this helps.

Best regards

Mark

[Suman_1978 · Accepted solution]

Hi,

CR7 indicates a system error.  Clearing NVRAM may help.

Attached is a pic of system board with switch location.

Thank You!
I am a HP employee.